Table of Contents
Advertisement
Software • Windows 10 IoT Enterprise 2015 LTSB
Information:
Required drivers can only be downloaded from the B&R website, not from manufacturer websites.
3.7 Activation
Like it's predecessor (Windows Embedded 8.1 Industry Professional), Windows 10 IoT Enterprise 2015 LTSB must
also be activated. This has already been done at B&R.
The status of the activation can be viewed in the Control Panel:
Information:
Activation can become negated when making changes to hardware (e.g. replacing components in re-
pair situations) and when reinstalling the system (e.g. with the recovery DVD).
In this case, a "watermark message" will always be shown on the screen:
Windows 10 IoT Enterprise 2015 LTSB does not carry out any restarts or show any pop-up messages, which means
that it is fully functional at all times. Personalization is not possible, however (e.g. setting the desktop background).
The product can be activated at a later time either over the phone or via the Internet. Instructions for doing so can
be found on in the Windows Control Panel under "Update & Security > Activation".
Information:
The product key never has to be entered for reactivation.
3.8 Contents of the recovery DVD
The DVD with model number 5SWW10.0200-MUL is only for recovery purposes.
Information:
It is only used to carry out the basic installation of Windows 10 Enterprise 2015 LTSB. In contrast to the
preinstalled operating system versions, the operating system does not include device-specific drivers
(network, graphics, ADI, etc.) or optimized settings, nor is it activated! The product can be activated at
a later time either over the phone or via the Internet (see "Activation").
224
Panel PC 2100 user's manual V1.11
Advertisement
Table of Contents
