B&R Panel PC 2100 User Manual page 216

Software • BIOS options
BIOS setting Function
Terminal type Option for configuring keyboard input
1)
Baud rate Option for setting the transfer rate of the serial
1)
interface (bits per second).
Flow control Option for configuring the data flow control
1)
Continue C.R. after POST Option for enabling/disabling console redirection
1)
after POST
Allow hotkey in S4 resume Option for enabling/disabling hotkey recognition
from the S4 state
UEFI boot Option for enabling/disabling UEFI boot
Legacy boot Option for enabling/disabling legacy boot
Boot in legacy video Option for enabling/disabling graphics initializa-
mode tion after BIOS POST with legacy ROM
2)
Load OPROM Setting for loading all option ROMs or those de-
2)
pending on the boot device
Boot priority Setting for prioritizing the boot option between
UEFI and legacy boot
EFI BS memory allocation Option for configuring the memory for the EFI
boot services.
1) This setting is only possible if Console redirection is set to Enabled.
2) This setting is only possible if Legacy boot is set to Enabled.
216
Configuration options
UART A, UART B, UART C,
UART D, UART E, UART F
9600, 19200, 38400,
57600, 115200
RTS/CTS
XON/XOFF
Disabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
On demand
UEFI first
Legacy first
Disabled
Table 211: Boot - Boot configuration
Effect
Allows access via the selected serial interface
ANSI Enables the ANSI convention (extended ASCII
character set)
VT100 Enables the VT100 convention (ASCII charac-
ter set)
VT100+ Enables the VT100+ convention (ASCII charac-
ter set and support for color, function keys, etc)
UTF8 Enables the UTF-8 convention (uses UTF-8 en-
coding to assign Unicode characters to one or
more bytes)
Enables a transfer rate of x bits
None Disables data flow control
Enables hardware handshake
Enables software handshake
Disables this function
Enabled Enables this function
Disables this function
Enables this function. The PC exits the S4 state
when a key is pressed.
Disables this function
Enables this function
Disables this function
Enables this function
Disables this function
Enabled Enables this function
Information:
The screen remains black and displays
nothing after BIOS POST.
All Loads all option ROMs
Loads option ROMs depending on the boot de-
vice
Boots first from UEFI ROM
Boots first from legacy ROM
The minimum required memory for the EFI boot
services is reserved.
Enabled The maximum required memory (approx. 130
MB more) for the EFI boot services is reserved.
Panel PC 2100 user's manual V1.11