Table of Contents
Advertisement
Technical data • Individual components
Product ID
UL 50 protection
Mechanical characteristics
Front
4)
Frame
Panel overlay
Material
Light background
Dark gray border around display
Gasket
Dimensions
Width
Height
Weight
1)
Yes, although applies only if all components installed within the complete system have this certification and the complete system itself carries the corresponding
mark.
2)
At an ambient temperature of 25°C. Reducing the brightness by 50% can result in an approximately 50% increase in the half-brightness time.
3)
Touch screen drivers for approved operating systems are available in the Downloads section of the B&R website.
4)
There may be visible deviations in the color and surface appearance depending on the process or batch.
3.2.8.4 Dimensions
3.2.8.5 Prerequisites and requirements
10.4" AP1000 display units are supported beginning with the following firmware versions:
• V3.11 for the 5DLSDL.1001-00 SDL/DVI receiver
• V4.08 for the 5DLSD3.1001-00 SDL3 receiver
• V1.03 for the 5PPC2100.BYxx-000 PPC2100 system unit
• V1.18 for the 5PC901.TS77-xx PPC900 system unit
96
Table 78: 5AP1182.1043-000 - Technical data
423
Figure 67: 5AP1182.1043-000 - Dimensions
5AP1182.1043-000
Front: Type 4X indoor use only
Naturally anodized aluminum
Polyester
RAL 9006
RAL 7024
3 mm built-in gasket
423 mm
288 mm
3500 g
Panel PC 2100 user's manual V1.11
Advertisement
Table of Contents
