Table of Contents
Advertisement
Accessories • Terminal block IF options
2 Terminal block IF options
2.1 0TB1210.3100
2.1.1 General information
This 2-row, 10-pin TB1210 terminal block is used to connect to the button/switch interface of the Automation Panel
9xD as well as to the interfaces on various interface options.
2.1.2 Order data
Model number
Short description
Terminal blocks
0TB1210.3100
Connector - Female 10-pin - Cage clamp - Protected against
vibration by the screw flange
2.1.3 Technical data
Product ID
General information
Certification
CE
cULus
cULus HazLoc Class 1 Division 2
GL
Terminal block
Note
Number of pins
Type of terminal block
Cable type
Distance between contacts
Connection cross section
AWG wire
Wire end sleeves with plastic covering
Solid wires
Fine strand wires
With wire end sleeves
Electrical characteristics
Nominal voltage
Nominal current
2)
1)
Yes, although applies only if all components installed within the complete system have this certification and the complete system itself carries the corresponding
mark.
2)
The limit data for each I/O module must be taken into consideration.
258
Table 235: 0TB1210.3100 - Order data
PUSH IN cage clamp terminal block connector
Table 236: 0TB1210.3100 - Technical data
0TB1210.3100
Yes
Yes
Yes
1)
Yes
Nominal values according to UL
10 (female)
Only copper wires (no aluminum wires!)
3.5 mm
26 to 16 AWG
0.14 to 1 mm²
0.14 to 1.5 mm²
0.14 to 1.5 mm²
0.14 to 1.5 mm²
300 V
10 A
Panel PC 2100 user's manual V1.11
Figure
Advertisement
Table of Contents
