Table of Contents
Advertisement
The default settings are the optimized settings that are applied when selecting the "Load setup defaults" function
on the BIOS Setup "Exit" screen or pressing <F9> on the individual screens (applies the default settings for the
respective screen only).
1.4 BIOS Setup keys
The following keys are enabled during POST:
Information:
Key signals from USB keyboards will only be registered after the USB controller has been initialized.
Keys
F2
F5
<Pause>
The following keys can be used once inside BIOS Setup:
Key
F1
Cursor ↑
Cursor ↓
Cursor ←
Cursor →
+-
Enter
Page ↑
Page ↓
Home
End
F7
F9
F10
ESC
Panel PC 2100 user's manual V1.11
Function
Opens the main BIOS Setup screen
Opens the boot menu. This lists all bootable devices that are connected to the system. Selecting a device with cursor ↑,
cursor ↓ and then pressing <ENTER> will boot from that device.
Pauses POST. Pressing any other key resumes POST.
Table 180: BIOS-relevant keys for POST
Function
Opens general help information
Moves to the previous item
Moves to the next item
Moves to the previous item
Moves to the next item
Changes the setting for the selected function
Changes to the selected screen
Jumps to the first BIOS menu item or object
Jumps to the last BIOS menu item or object
Jumps to the first BIOS menu item or object
Jumps to the last BIOS menu item or object
Resets any changes
Loads and configures CMOS default values for all BIOS settings
Saves and exits
Exits a submenu
Table 181: BIOS-relevant keys
Software • BIOS options
185
Advertisement
Table of Contents
