Automation Runtime Embedded (Aremb); Technology Guarding - B&R Panel PC 2100 User Manual

7.4 Automation Runtime Embedded (ARemb)

System requirements
The following software versions (or higher) are required to operate Automation Runtime Embedded on a Panel
PC 2100:
• ARemb upgrade AR C4.10
° There is support with single-touch functionality starting with this version for 5AP933* multi-touch
display units with Rev. ≤ B7.
• ARemb upgrade AR F4.10
° There is support with single-touch functionality starting with this version for 5AP933* multi-touch
display units with Rev. ≤ B7 and Rev. ≥ B8.
• Automation Studio V4.1.4.0
• Visual Components Runtime (VC) V4.15.0
• Process Visualization Interface (PVI) V4.1.5
• Technology Guard
PVI Development Setup must be downloaded from the B&R website (www.br-automation.com) and installed sep-
arately!
Information:
In order to use Automation Runtime Embedded (ARemb), the BIOS setting Advanced - OEM features -
Miscellaneous configuration - Realtime environment must be set to Enabled.

7.5 Technology Guarding

Technology Guarding is a licensing approach used to safeguard individual software components. Licenses are
stored on a "Technology Guard" (also referred to simply as a dongle), which is connected to an available USB
interface on the target system.
The B&R software components Automation Runtime Embedded (ARemb), Automation Runtime Windows (ARwin)
and Automation Runtime Embedded Terminal require a license, so a Technology Guard must always be used.
Information:
Licensing with the Technology Guarding wizard is available in Automation Studio 4.1 and Automation
Runtime 4.08 and higher. Earlier versions of Automation Runtime do not require a Technology Guard.
Additional information about Technology Guarding can be found in the Automation Studio help system.
Panel PC 2100 user's manual V1.11
Software • Automation Runtime
235