Boot Configuration - B&R Panel PC 2100 User Manual

1.8.2 Boot configuration

BIOS setting Function
NumLock Option for configuring the numeric keypad (Num
Lock) when booting the system
Timeout Option for configuring how long the setup activa-
tion key (key for entering BIOS) and boot logo
are displayed
CSM support Depending on the operating system, the com-
patibility support module (BIOS compatibility
mode) supports backwards compatibility for
BIOS legacy boot settings.
Quick boot Option for reducing the boot time by skipping
some POST procedures
Boot logo selection Option for displaying the boot logo
Diagnostic splash screen Setting for enabling/disabling the "Diagnostic
splash screen" when booting
Diagnostic summary Option for enabling/disabling the "Diagnostic
screen splash screen" when booting
USB legacy support Option for configuring USB legacy support.
Console redirection Option for configuring the remote console. The
remote console can be used to access BIOS
Setup via the serial interface using a terminal
emulator (PuTTY or HyperTerminal).
Information:
This function is only possible with the
5ACCIF01.FPLS-000 or 5ACCIF01.F-
PLS-001 IF option.
Port console Option for configuring the serial interface.
1)
Panel PC 2100 user's manual V1.11
Figure 133: Boot - Boot configuration
Configuration options
2 to 99
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Table 211: Boot - Boot configuration
Software • BIOS options
Effect
On Enables the numeric keypad
Off Only enables the cursor (movement) functions
of the numeric keypad
Displays the setup activation key for x seconds
Yes Enables BIOS compatibility mode and allows
the use of operating systems without UEFI sup-
port. Legacy and UEFI boot are possible.
No BIOS compatibility mode is enabled and only
the UEFI boot is possible. Legacy boot is not
supported.
Disables this function
Enables this function
Displays the standard logo
Displays the OEM logo
Auto Displays the OEM logo automatically if it's avail-
able
Does not display the "Diagnostic splash screen"
Always displays the "Diagnostic splash screen"
when booting
Disables this function
Enables this function
Disables this function
Complete USB support is disabled (mouse, key-
board, USB mass storage device, etc.)
Enables this function
Disables this function
Enables this function
All Allows access via any serial interface
215