B&R Panel PC 2100 User Manual page 23

AP1000 display units with retaining clips - Installation diagrams
Figure 6: Panel PC 2100 with AP1000 display units with retaining clips - Installation diagram
All dimensions are specified in mm.
The cutout tolerance values are +0 mm / -0.5 mm.
Display type Model number
5.7" single-touch 5AP1120.0573-000
5.7" with keys 5AP1151.0573-000
7.0" single-touch 5AP1120.0702-000
10.1" single-touch 5AP1120.101E-000
10.4" single-touch 5AP1120.1043-000
10.4" single-touch with keys 5AP1180.1043-000
12.1" single-touch 5AP1120.121E-000
15.6" single-touch 5AP1120.156B-000
Table 12: AP1000 display units with retaining clips - Installation diagrams
The "Z" measurement indicates the thickness of the wall or control cabinet panel.
A 2.5 mm hex socket screwdriver is needed to tighten and loosen the screws on the retaining clips. The maximum
tightening torque for the retaining clips is 1 Nm.
Panel PC 2100 user's manual V1.11
X
X Y Z min Z max
199 143 1 8
199 232 1 8
199 143 1 8
268 180 1 6
303 243 1 10
303 243 1 10
313 210.5 1 6
403 247.5 1 6
Technical data • Complete system
Z
Number of retaining clips
4
6
4
10
8
8
10
10
23