Table of Contents
Advertisement
User Manual of Network Video Recorder
5.6 Manual Recording
Purpose:
Follow the steps to set the manual recording. When the manual recording is enabled, you don't need to set a
schedule for recording..
Steps:
1.
Enter the Manual settings interface.
Menu> Manual
2.
Enable recording for camera (s).
Click the status button beside each camera number to change
all cameras by clicking the status bar before Analog to change it to
3.
Set recording mode to manual.
By default, the camera is enabled with recording by schedule (
to
and click again to enable the recording to manual (
: recording by schedule.
: recording by manual operation.
After rebooting, all the manual records enabled are canceled.
4.
Start all-day continuous recording or all-day motion detection recording of all channels.
1) Click
Figure 5. 21 Start Normal or Motion Detection Recording
2) Click Yes to enable all-day continuous or motion detection recording of all channels.
Figure 5. 20 Manual Record
for Continuous or Motion Detection recording.
to
, or you can enable recording for
.
). Click the
).
67
status bar to change it
Advertisement
Table of Contents
