Calling Patrols - HIKVISION DS-7100NI-K1 Series User Manual

Select patrol No. in the drop-down list of patrol.
Click Set to add key points for the patrol.
Configure key point parameters, such as the key point No., duration of staying for
one key point and speed of patrol. The key point is corresponding to the preset.
The Key Point No. determines the order at which the PTZ will follow while cycling
through the patrol. The Duration refers to the time span to stay at the
corresponding key point. The Speed defines the speed at which the PTZ will move
from one key point to the next.
Click Add to add the next key point to the patrol, and you can click OK to save the
key point to the patrol.
You can delete all the key points by clicking Clear for the selected patrol, or
click the Clear All button to delete all the key pints for all patrols.

Calling Patrols

Purpose:
Calling a patrol makes the PTZ to move according the predefined patrol path.
Click the button PTZ in the lower-right corner of the PTZ setting interface;
Or press the PTZ button on the front panel or click the PTZ Control icon
the quick setting bar, or select the PTZ option in the right-click menu to show
the PTZ control panel.
Click the button to show the general settings of the PTZ control.
Network Video Recorder User Manual
Key point Configuration
PTZ Panel - General
46
in