Table of Contents
Advertisement
2)
Select the small window, and double-click on the channel number to display the channel on the
window.
If you do not want the camera to be displayed on the live view interface, click the corresponding
to stop it.
You can also click
view.
3)
Click the Apply button to save the setting.
3.
Set the stream type for live view of camera.
1)
Click the More Settings to enter the more settings interface.
2)
Select the camera to configure from the list.
3)
Select the stream type to Main Stream, Sub-Stream or Auto.
4)
Click Apply to save the settings.
5)
(Optional) You can click the Copy button to copy the stream type settings of the current camera to
other camera (s).
3.4 Channel-zero Encoding
Purpose:
Sometimes you need to get a remote view of many channels in real time from web browser or CMS (Client
Management System) software, in order to decrease the bandwidth requirement without affecting the image quality,
channel-zero encoding is supported as an option for you.
Steps:
1.
Enter the Live View Settings interface.
Menu > Configuration > Live View
2.
Select the Channel-Zero Encoding tab.
3.
Check the checkbox after Enable Channel Zero Encoding.
4.
Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
After you set the Channel-Zero encoding, you can get a view in the remote client or web browser of 16 channels in
one screen.
Network Video Recorder User Manual
button to start live view for all the channels and click
Figure 3. 9 Stream Type Settings
Figure 3. 10 Live View- Channel-Zero Encoding
58
to stop all the live
Advertisement
Table of Contents
