Managing Network Hdd - HIKVISION LV-N9600 Series User Manual

12.2 Managing Network HDD

Purpose:
You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD. Up to 8 network disks can be
added.
Steps:
1.
Enter the HDD Information interface.
Menu > HDD>General
2.
3. Add the allocated NetHDD.
4. Select the type to NAS or IP SAN.
5. Configure the NAS or IP SAN settings.
Add NAS disk:
•
1) Enter the NetHDD IP address in the text field.
2) Click the Search button to search the available NAS disks.
3) Select the NAS disk from the list shown below.
Or you can just manually enter the directory in the text field of NetHDD Directory.
4) Click the OK button to add the configured NAS disk.
User Manual of LV-N9600 Series NVR
Figure 12. 5 HDD Information Interface
Click the Add button to enter the Add NetHDD interface, as shown
Figure 12. 6 HDD Information Interface
166