Chapter 12 Hdd Management; Initializing Hdds - HIKVISION HWN-2104H-4P User Manual

Chapter 12 HDD Management

Initializing HDDs

Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your NVR.
A message box pops up when the NVR starts up if there exits any uninitialized HDD.
Click Yes button to initialize it immediately or you can perform the following steps to initialize the
HDD.
Enter the HDD Information interface.
Menu > HDD> General
Select HDD to be initialized.
Click the Init button.
Select the OK button to start initialization.
Network Video Recorder User Manual
Message Box of Uninitialized HDD
HDD Information Interface
Confirm Initialization
178