Table of Contents
Advertisement
Use This Chapter
Read this
chapter for:
•
1784-PCC, 1784-PCIC, 1784-PCICS,
1784-PKTCS cards
1
Connect a Computer to the
ControlNet Network
This chapter describes how to configure a personal computer to operate on a
ControlNet network.
For This Information
Connect a Computer to Any Network
Configure the ControlNet Communication Driver in the RSLinx Software
Connect a SoftLogix Controller to ControlNet
You need to load a ControlNet communication driver for a personal computer
to communicate with other devices on a ControlNet network. A personal
computer needs this driver to:
• upload and download controller projects over ControlNet via RSLogix
5000 programming software.
• schedule the ControlNet network via RSNetWorx for ControlNet
software.
• operate an HMI type application.
Before you load a communication driver, make sure the:
• ControlNet communication card is already installed in the personal
computer.
• personal computer is properly connected to the ControlNet network.
For more information on how to install the ControlNet communication cards,
use the installation instructions for each card. The respective installation
instructions are listed in the table Related Documentation in the Preface.
Chapter
Publication CNET-UM001C-EN-P - November 2005
2
See Page
2-2
2-3
2-5
Hide quick links:
Advertisement
Table of Contents
