D-2
Control 1771 I/O Over ControlNet
Add the Local 1756-CN2(R)
or 1756-CNB(R) Module
Add the 1771-ACN(R)15
Module
A. Right-click on the local
1756-CNB(R) module.
B. Click New Module.
C. Select the 1771-ACN(R)15
module.
D. Click OK.
Publication CNET-UM001C-EN-P - November 2005
For more information on how to do this, see the section Add Local and
Remote ControlNet Modules in the chapter Control I/O.
To transfer discrete data between remote 1771 I/O and the ControlLogix
controller in the local chassis (via the 1756-CN2(R), 1756-CNB(R) module),
you need to add a remote 1771-ACN(R)15 ControlNet adapter to the I/O
configuration.
1. Add the 1771-ACN(R)15 module.