1-10
About the Logix5000 ControlNet Communication Modules
Publication CNET-UM001C-EN-P - November 2005
In this example, a workstation configures a drive on a DeviceNet network. The
workstation bridges from ControlNet to DeviceNet to reach the drive.
Figure 1.2 Configure a Drive on a DeviceNet Network
ControlNet Network
DeviceNet Network
In this example, the bridge can be a ControlNet to DeviceNet bridging device,
for example a 1788-CN2DN or a Logix5000 system with a ControlNet
communication module and a DeviceNet communication module. This table
describes how to use Logix5000 systems in this example.
Table 1.2 Example Bridges and Related Components
If The Bridge Is
CompactLogix system
ControlLogix system
FlexLogix system
SoftLogix system
Workstation
Bridge
You Need These Components
• a CompactLogix 1769-L32C, or
1769-L35CR controller
• a 1769-SDN scanner
• a 1756-CN2 module
• a 1756-CNB module
• a 1756-DNB module
• a FlexLogix controller
• a 1788-CNx card
• a 1788-DNBO card
• a SoftLogix controller
• a 1784-PCIC(S) card
• a 1784-PCIDS card
PanelView Station
PWR
STS
Drive
PORT
MOD
NET A
NET B