Add Local And Remote Controlnet Modules - Rockwell Automation Allen-Bradley ControlNet 1734-ACNR User Manual

4-10 Control I/O
Add Local and Remote
ControlNet Modules
Publication CNET-UM001C-EN-P - November 2005
Before you can connect to and control distributed I/O, you must add local and
remote ControlNet communication modules. The type of distributed I/O
determines your choice of a remote ControlNet adapter. For more
information, see the table Choose the Appropriate Remote Adapter.
Table 4.7 Choose the Appropriate Remote Adapter
If The Distributed I/O Is
1756 ControlLogix I/O
1794 FLEX I/O
1797 FLEX Ex I/O
1734 POINT I/O
The figure Add Local and Remote ControlNet Modules to an RSLogix 5000
Project shows a brief series of screens used when adding local and remote
ControlNet communication modules to an RSLogix 5000 project. For more
detailed information on how to add local and remote ControlNet modules to
your project, see the chapter Configure a ControlNet Module.
Figure 4.1 Add Local and Remote ControlNet Modules to an RSLogix 5000 Project
1. Add Local ControlNet Communication Module
2. Add Remote ControlNet Communication Module.
Select This Remote
Adapter
1756-CN2, 1756-CN2R
1756-CNB, 1756-CNBR
1794-ACN15,
1794-ACNR15
1797-ANCR
1734-ACNR
Which You Configure Via
RSLogix 5000 software