A. Click Network.
B. Click Online.
Click Enable Edits.
A. Right-click on the ControlNet
scanner card.
B. Click Scanlist Configuration.
Use RSNetWorx to Produce a Tag from a ControlNet Scanner
Use the RSNetWorx Scanlist Configuration tool to configure a ControlNet
scanner to produce tags. In the example used for the following steps, a
2711P-RN15S ControlNet Scanner module located in a PanelView Plus
terminal produces a tag for a ControlLogix controller to consume.
1. Open the RSNetWorx for ControlNet file for your project.
2. Go online.
3. Enable edits.
4. Access the Scanlist Configuration for the ControlNet Scanner.
Produce and Consume Tags (Interlock Controllers)
Publication CNET-UM001C-EN-P - November 2005
5-13