Rockwell Automation Allen-Bradley ControlNet 1734-ACNR User Manual page 43

A. Expand the tree until you
find the correct driver.
B. Select the controller to
which you need to
download configuration.
In this example, the
Logix5550 controller is
connected via an RS-232
DF1 device.
C. Click Download.
Click Download.
3. Use the Who Active pop-up screen to download the project to
the controller.
The window above uses a previously configured driver for the
communication path to the controller. In this example, the computer is
connected to the controller's RS-232 port, so the configuration is
downloaded to the controller via RS-232 and DF-1 protocol.
4. Download the configuration.
Be aware, however, that before downloading configuration, the RSLogix
5000 software warns you of any implications the download has on your
application.
Configure a ControlNet Module
Publication CNET-UM001C-EN-P - November 2005
3-11