Rockwell Automation Allen-Bradley ControlNet 1734-ACNR User Manual page 68

4-12 Control I/O
To Do This
Use the Specify the general
module's information about the module,
default such as name, comm format,
configuration. RPI and click Finish.
Customize the Specify the general
configuration. information about the module
such as name, comm format,
RPI. Then click Next to step
through subsequent screens
to configure such parameters
as filter times and fault
actions.
Publication CNET-UM001C-EN-P - November 2005
3. Configure the distributed I/O module. Depending on the distributed
I/O type, the configuration screens differ. The example below shows
screen for a 1794-IB16XOB16P/A digital combo module.
For more information on configuring distributed I/O modules over
ControlNet, see the modules' individual technical documentation and
the RSLogix 5000 software online help.
The Comm Format selection you make when you add distributed I/O
modules is based on whether you want rack optimized or direct connections to
each distributed I/O module. In general, use this table to select distributed
I/O formats.