Rockwell Automation Allen-Bradley ControlNet 1734-ACNR User Manual page 26

1-12 About the Logix5000 ControlNet Communication Modules
To Bridge To This
From This Network:
Network
ControlNet DeviceNet
EtherNet/IP
EtherNet/IP ControlNet
DeviceNet
(1)
You can bridge from a ControlNet network to an Ethernet network and from an Ethernet network to a ControlNet via a SoftLogix virtual chassis. However, the products and
methods you must use to do so are more detailed than can be effectively described in this table. For more information on how to bridge from one network to another via a
SoftLogix virtual chassis, see the SoftLogix5800 System User Manual, publication number 1789-UM002.
(2)
Can serve as a dedicated standalone bridge from ControlNet to DeviceNet.
(3)
Can serve as a dedicated standalone bridge from EtherNet/IP to DeviceNet.
Publication CNET-UM001C-EN-P - November 2005
This table lists the possible bridges between communication networks.
Table 1.3 Bridges Between Communication Networks
You Can Use the Following
In a CompactLogix System
• 1769-L32C or 1769-L35CR
controller
• 1769-SDN scanner
or
• 1769-L32C or 1769-L35CR
controller
• one 1788-CN2DN
(2)
module
NA
NA
• 1769-L32E or 1769-L35E
controller
• 1769-SDN scanner
or
• 1769-L32E or 1769-L35E
controller
• one 1788-EN2DN
(3)
module
(1)
In a ControlLogix Chassis
• 1756-CN2(R) module
• 1756-CNB(R) module
• 1756-DNB module
• 1756-CN2(R) module
• 1756-CNB(R) module
• 1756-ENBT module
• 1756-ENBT module
• 1756-CN2(R) module
• 1756-CNB(R) module
• 1756-ENBT module
• 1756-DNB module
In a FlexLogix Controller
• 1788-CN(x) card
• 1788-DNBO card
or
• 1788-CN(x) card
• one 1788-CN2DN
(2)
module
• 1788-CN(x) card
• 1788-ENBT card
• 1788-ENBT card
• 1788-CN(x) card
• 1788-ENBT card
• 1788-DNBO card
or
• 1788-ENBT card
• one 1788-EN2DN
(3)
module