Add Distributed I/O - Rockwell Automation Allen-Bradley ControlNet 1734-ACNR User Manual

Add Distributed I/O

For a Typical Distributed I/O Network
Controller
You Build the I/O Configuration in This Order
A. Add the local communication module (bridge).
B. Add the remote adapter for the distributed I/O
chassis or DIN rail.
C. Add the distributed I/O module.
A. Right-click on the remote
ControlNet communication
module.
B. Click New Module.
To communicate with the I/O modules in your system, you add bridge,
adapter, and I/O modules to the I/O Configuration folder of the controller.
Within the I/O Configuration folder, you organize the modules into a
hierarchy (tree/branch, parent/child).
Local
Communication
Module
Do these steps to add distributed I/O to your RSLogix 5000 project:
1. Add the local and remote ControlNet communication modules as
described in section Add Local and Remote ControlNet Modules or in
the chapter Configure a ControlNet Module .
2. Add the distributed I/O module.
I/O
Remote
Adapter Module
Publication CNET-UM001C-EN-P - November 2005
Control I/O 4-11
Device