A. Right-click on the local
communication module.
B. Select New Module.
A. Select the remote ControlNet
communication module.
B. Click OK.
Add a Remote ControlNet Module
After you have added the local ControlNet communication module, you must
add remote ControlNet communication modules. A remote ControlNet
module is a module that resides in a separate chassis from the controller.
1. Select a New Module for the I/O Configuration.
2. Select the module type from the Select Module Type pop-up.
You can connect any remote ControlNet communication module, to a
local ControlNet communication module.
Configure a ControlNet Module
Publication CNET-UM001C-EN-P - November 2005
3-7