3-14
Configure a ControlNet Module
A. Click on the RSNetWorx tab.
B. Type the name of the new
ControlNet file.
C. Click Apply.
Click Yes.
A. Click on Schedule the ControlNet
network. If you make this
selection, RSNetWorx software
automatically enable edits, create
the schedule and disable edits.
B. Click this button to launch the
RSNetWork for ControlNet
software.
Publication CNET-UM001C-EN-P - November 2005
2. On the RSNetWorx tab, name the new ControlNet file.
3. Because this is the first time you are scheduling the network, the file
does not exist. When RSLogix 5000 software prompts you to create the
new file, click Yes.
This step creates the file that RSNetWorx for ControlNet software uses
offline to browse and schedule network.
4. Launch RSNetWorx for ControlNet software to create the schedule.