F. Inhibit the module, if necessary.
Initially, do you want
Then
the module to
communicate with
the controller?
Yes
Leave the box
unchecked
No
Check the
(1)
box
(1)
When you test this portion of the system,
clear the check box.
G. Determine if you want a major fault on the controller if
the connection to the local communication module fails
in Run Mode.
If You Want The
Then
Controller To
fault (major fault)
Select the check box
continue operating
Leave the check box
unchecked
(1)
Monitor the connection using ladder logic.
Configure a ControlNet Module
F. Click Finish.
(1)
Publication CNET-UM001C-EN-P - November 2005
3-5