Rockwell Automation Allen-Bradley ControlNet 1734-ACNR User Manual page 47

Click OK.
Click here to
enable edits.
A. Click Network.
B. Click Properties.
5. The RSNetWorx for ControlNet software starts and creates a schedule
that includes the devices in your RSLogix 5000 project. When the
software prompts you to Optimize and re-write schedule for all
connections, click OK.
Because you selected the Schedule the Network option in a previous
step, RSNetWorx for ControlNet software automatically enables and
disables edits before and after creating the schedule for the network
respectively.
6. Enable Edits in the schedule.
We recommend that you return to the RSLogix 5000
TIP
software and save the project after you enable edits in the
RSNetWorx for ControlNet software. Saving the file
updates the network file in your RSLogix 5000 project.
7. To change the network properties from default settings to those that
best fit your network, access the network properties.
Configure a ControlNet Module
Publication CNET-UM001C-EN-P - November 2005
3-15