Add A Local Controlnet Module - Rockwell Automation Allen-Bradley ControlNet 1734-ACNR User Manual

A. Right-click on I/O
Configuration.
B. Select New Module.
A. Select the local ControlNet
communication module.
B. Click OK.

Add a Local ControlNet Module

After you have started RSLogix 5000 software and created a controller project,
you can add ControlNet communication modules. A local ControlNet module
is a module that resides in the same chassis as the controller.
When you create a new RSLogix 5000 project with the
IMPORTANT
CompactLogix 1769-L32C or 1769-L35CR controller, the
Controller Organizer creates a ControlNet port in the local
chassis. In this case, you do not need to add a separate local
communication module.
1. Select a New Module for the I/O Configuration.
2. Select the module type from the Select Module Type pop-up. The
example below uses a 1756-CNB module.
Configure a ControlNet Module
Publication CNET-UM001C-EN-P - November 2005
3-3