Table of Contents
Advertisement
A. Right-click on the local ControlNet
communication module.
B. Click Properties.
Schedule the Network Offline
The following instructions assume that:
• your RSLogix 5000 project uses 1 controller and 1 network. We
recommend that you use only one (1) 1756-CN2 or 1756-CNB module
in the local chassis when scheduling the network offline.
• your RSLogix 5000 project is complete but has not been downloaded to
the controller.
If your network has already been scheduled and you made a change to it, you
must reschedule it. Refer to the section Rescheduling a ControlNet Network
That Has Previously Been Scheduled for more information.
1. In your RSLogix 5000 project, access the local ControlNet module's
properties.
Configure a ControlNet Module
Publication CNET-UM001C-EN-P - November 2005
3-13
Hide quick links:
Advertisement
Table of Contents
