Operation - Onecontrol App; Accessing The Onecontrol App; Standard Mode And Menu; Basic Jack Operation - Lippert Components Ground Control 2.0 Master Owner's Manual

Operation - OneControl App

Accessing the OneControl App

1. Ensure there is power to the trailer's wireless network.
2.
Navigate to the device's (smart phone, tablet, etc.) wifi settings. Turn wireless feature on and connect
to the myRV wireless network.
NOTE: If this is the first time connecting to the myRV wireless network, a password will be required. The
password is located on the trailer's wifi hub (Fig. 5).
3. Open the OneControl application on the compatible device.
NOTE: If the device states "Unresolved Network Connection," retry
connecting to the myRV wireless network and/or wait for the
connection to resolve and display "Connected" under the myRV
wireless connection.
4. The application will request the user "Agree" to an end user license
agreement, create a PIN and "Re-enter PIN to confirm."
5.
The OneControl app will now display all functions. Choose "Leveler."

Standard Mode and Menu

Standard Mode is the mode launched when the OneControl app "Leveler" function is powered up. The screen
will show the system menu (Fig. 4). The front jacks can be extended/retracted in Standard Mode. Rear jacks
can only be retracted from this mode.

Basic Jack Operation

While in Standard Mode:
1. Press "RETRACT" (Fig. 4H) or "EXTEND" (Fig. 4I) and "FRONT" (Fig. 4A) to extend or retract front jacks.
2.
Press "RETRACT" and "REAR" (Fig. 4) to retract rear jacks.
3.
Press the "AUTO LEVEL" (Fig. 4J) button to start the leveling sequence.
4.
Press the "AUTO HITCH" (Fig. 4K) button to start the hitch recognition sequence when reconnecting to the tow
vehicle.
5.
Use the "UP" or "DOWN" arrow buttons (Fig. 4G) to cycle through the menu options:
A. Info: Scroll to "INFO" (Fig. 4C) and press "ENTER" button to display system information, e.g., angle, jack
stroke or software version.
B. Auto Retract: Scroll to "AUTO RETRACT" (Fig. 4D) and press the "ENTER" button. Choose
either "ALL JACKS" or "REAR JACKS." Press the "ENTER" button again to start the "Auto
Retract" sequence.
C. Manual Mode: Scroll to "MANUAL MODE" (Fig. 4E) and press "ENTER" button to start Manual Level
operation.
I.
Press "EXTEND" (Fig. 6F) or "RETRACT" (Fig. 6E) and "FRONT" (Fig. 6B) to operate front jacks.
II. Press "EXTEND" or "RETRACT" and "REAR" to operate rear jacks.
III. Press "EXTEND" or "RETRACT" and
"RIGHT" to operate right jacks.
IV. Press "EXTEND" or "RETRACT" and "LEFT"
to operate left jacks.
NOTE: To operate jacks individually, press "EXTEND"
or "RETRACT" then press the "LEFT" (Fig. 6A) or
"RIGHT" (Fig. 6C) button while simultaneously
pressing the "FRONT" or "REAR" button
(Fig. 6B and 6D), depending on which jack
needs to be operated.
Rev:11.08.19
B
A
D
Page 31
Fig. 5
Fig. 6 - Manual Mode
C
E
F
CCD-0001573-08