Lippert Components GROUND CONTROL 3.0 Maintenance

Hide thumbs Also See for GROUND CONTROL 3.0:

Purpose

To maintain and extend the product life of the Ground Control 3.0® product line.

Failure to follow the instruction provided in this manual may result in death, serious personal injury,

severe product or property damage or voiding of the component warranty.

The trailer MUST be supported per the manufacturer's recommendations before working

underneath. Failure to do so may result in death, serious personal injury, severe product or property

The coach should be supported at both front and rear axles with jack stands before working

underneath. Failure to do so may result in death, serious personal injury, severe product or property

Wear eye protection and any other appropriate personal protective equipment when performing

• Lint-free cloth

• Silicone lubricant

Rev: 05.13.19

GROUND CONTROL

LEVELING AND STABILIZATION

damage or voiding of the component warranty.

Moving parts can pinch, crush or cut. Keep clear and use caution.

3.0 MAINTENANCE

maintenance.

Page 1

CCD-0002424

Table of Contents

Do you have a question about the GROUND CONTROL 3.0 and is the answer not in the manual?

Page 1 ® LEVELING AND STABILIZATION Purpose To maintain and extend the product life of the Ground Control 3.0® product line. Safety Failure to follow the instruction provided in this manual may result in death, serious personal injury, severe product or property damage or voiding of the component warranty.
Page 2 GROUND CONTROL 3.0 MAINTENANCE ® LEVELING AND STABILIZATION Maintenance Steps For optimum performance, the system requires full battery current and voltage. The battery must be maintained at full capacity. Inspect and clean all terminals and other power unit electrical connections at the battery, controller and jacks every 12 months for corrosion and loose or damaged connections.