Lippert Components Ground Control 2.0 Master Owner's Manual page 75

5K Jack - Top of Jack Motor Override:
3/8
Tools needed:
" drive ratchet and extension, no socket.
1.
Find the port on the top of the jack motor (Fig. 41A).
2.
Remove the rubber plug (Fig. 42A).
3.
Insert the 3/8" drive ratchet into the port (Fig. 43).
4. Turn the override until the jack extends or retracts to desired position.
5K Jack - Bottom of Jack Motor Override:
3/8
Tools needed:
" drive ratchet and extension, and a
1.
Find the port on the bottom of the jack motor (Fig. 41B).
2.
Remove the rubber plug (Fig. 44A).
3.
Insert the 5/16" socket into the port and onto the nut (Fig. 45A).
4. Turn the override until the jack extends or retracts to desired position.
Fig. 41
A
B
Rev:11.08.19
5/16
" socket.
Fig. 42
A
Fig. 44
A
Page 75
Fig. 43
Fig. 45
A
CCD-0001573-08