Operation - Onecontrol App; Accessing The Onecontrol App - Lippert Components Ground Control TT Installation And Owner's Manual

Leveling onecontrol touch panel
Hide thumbs Also See for Ground Control TT:
Table of Contents

Advertisement

Operation - OneControl App

NOTE: The OneControl App will only function if the trailer
is equipped with the myRV wifi hub (Fig.34). To wire the
OneControl and the controller into the existing circuit:
1. Disconnect an existing canbus cable from any myRV
component.
2. Connect the canbus cable to either the OneControl
Touch Panel or controller.
3. Connect the provided canbus cable to the remaining
component (OneControl or controller).
4. Run a canbus cable back to the existing component
from which the circuit was originally disconnected.
NOTE: If the use of the OneControl App is desired
and the trailer is not equipped with myRV, call Lippert
Components to order additional parts and instructions.

Accessing the OneControl App

5. Ensure there is power to the trailer's wireless network.
6. Navigate to the device's (smart phone, tablet, etc.)
wifi settings. Turn wireless feature on and connect to the
myRV wireless network.
NOTE: If this is the first time connecting to the myRV
wireless network, a password will be required. The
password is located on the trailer's wifi hub (Fig.34).
7. Open the OneControl application on the compatible device.
Fig.34
lippertcomponents.com
574-537-8900
Ground Control
Leveling OneControl
Touch Panel
Installation and Owner's Manual
(For Aftermarket Applications)
NOTE: If the device states "Unresolved Network
Connection," retry connecting to the myRV wireless
network and/or wait for the connection to resolve and
display "Connected" under the myRV wireless connection.
8. The application will request the user "Agree" to an end
user license agreement, create a PIN and "Re-enter PIN to
confirm."
9. On "Initial Setup" choose "myRV" (Fig.35A).
10. The OneControl app will now display all functions.
Fig.35
BE SURE TO PARK THE TRAILER ON SOLID AND LEVEL
GROUND. PRIOR TO OPERATION, CLEAR ALL JACK
LANDING LOCATIONS OF DEBRIS AND OBSTRUCTIONS.
THE LOCATIONS SHOULD ALSO BE FREE OF SURFACE
DEPRESSIONS AND MOISTURE. WHEN PARKING THE
TRAILER ON EXTREMELY SOFT SURFACES, UTILIZE
LOAD DISTRIBUTION PADS UNDER EACH JACK.
PEOPLE AND PETS SHOULD BE CLEAR OF THE TRAILER
WHILE THE LEVELING SYSTEM IS OPERATED. NEVER
LIFT THE TRAILER COMPLETELY OFF THE GROUND.
LIFTING THE TRAILER SO THE WHEELS ARE NOT
TOUCHING THE GROUND WILL CREATE AN UNSTABLE
AND UNSAFE CONDITION.
20
Rev: 08.17 - GC
TT
®
A
TT Leveling OneControl
®
®
Touch Panel
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents