Selecting Multiple Programs - Siemens SINUMERIK 840D Operation/Programming Manual

6
File Management
6.3 Program management with PCU 50

6.3.7 Selecting multiple programs

Selecting several
programs as a block
Mark
-or-
Selecting several
programs individually
-or-
6-376
You can select several programs individually or in a block for
subsequent copying, deleting, etc.
Open the Program Manager.
Place the cursor on the first program that you want to select.
Press the "Mark" softkey.
Expand the program selection area by pressing the cursor up or
down key.
The entire block of programs is marked.
Open the Program Manager.
Place the cursor on the first program that you want to select.
Press the "Select" key.
Move the cursor to the next program that you want to select.
Press the "Select" key again.
The individually selected programs are marked.
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
6
10.04
 Siemens AG, 2004. All rights reserved