3
10.04
3.5.11 Chamfering a contour pocket
Call help display with
the
key
Parameters
Description for chamfer:
T, F, V
See Sec. "Programming the tool, offset value and spindle speed".
Machining type Chamfer
Z0
Workpiece height (abs.)
FS
Chamfer width (for chamfer only), inc.
ZFS
Insertion depth tool tip (for chamfer only), abs. or inc.
Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
If you have planned edge breaking, mill a chamfer after that.
Press the "Cont. mill." and "Mill pocket" softkeys.
Mill
pocket >
Select "Chamfer" in machining mode.
Help display "Chamfer pocket"
If you want to mill a chamfer and have programmed inside corners
without filleting during rounding, you must specify the radius of the
finishing tool as the rounding in the contour.
Programming with ShopMill
3.5 Contour milling
3
Unit
mm
mm
mm
3-215