Siemens SINUMERIK 840D Operation/Programming Manual page 248

3
Programming with ShopMill
3.7 Drilling
Select with softkey
Call help display with
the key
Parameters
Rectangular/ Programming with rectangular or polar dimensions.
polar
Z0 Height of workpiece (abs. or inc.)
X0 1. position of the hole in X (abs. or inc.)
Y0 1. position of the hole in Y (abs. or inc.)
Rectangular:
X1 ... X8 Other positions in the X axis (abs. or inc.)
Y1 ... Y8 Other positions in the Y axis (abs. or inc.)
If you want to program further positions, store the ones you have already
programmed and then open the parameter input form again by pressing softkey "Any
positions".
Polar:
L1... L7 Position distance (abs.)
α1 ... α7 Angle of rotation of line in relation to the X axis.
Positive angle:
Negative angle: Line is rotated clockwise.
If you want to program further positions, store the ones you have already
programmed and then open the parameter input form again by pressing softkey "Any
positions".
3-248
Positions >
Help display for "Freely programmable
positions, rectangular"
Description XY
(without A/ or B axis support)
Line is rotated counterclockwise.
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
10.04
Help display for "Freely programmable
positions, polar"
 Siemens AG, 2004. All rights reserved
3
Unit
mm
mm
mm
mm
mm
mm
Degr.