3
10.04
3.6.2 Circle with known center point
Circle
center point
Call help display with
the
key
Parameters
Direction of
The tool travels in the programmed direction from the circle starting point to its end
rotation
point. You can program this direction as clockwise or counterclockwise.
X
X position circle end point (abs. or inc.)
Y
Y position circle end point (abs. or inc.)
I
Distance between circle start and center point in X direction (inc.)
J
Distance between circle start and center point in Y direction (inc.)
Plane
The circle is traversed in the set plane with the relevant interpolation
parameters:
XYIJ: XY plane with interpolation parameters I and J
XZIK: XZ plane with interpolation parameters I and K
YZJK: YZ plane with interpolation parameters J and K
Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
3.6 Linear or circular path motions
The tool travels along a circular path from its current position to the
programmed circle end point. You must know the position of the circle
center point. The control calculates the radius of the circle/arc on the
basis of your interpolation parameter settings.
The circle can only be traversed at machining feedrate. You must
program a tool before the circle can be traversed.
Press the "Straight/Circle" and "Circle center point" softkeys.
Help display for circle with known center point
Description
Programming with ShopMill
mm
mm
mm
mm
mm
mm
mm
3
Unit
3-223