Siemens SINUMERIK 840D Operation/Programming Manual page 365

6
10.04
Replace all
Replace
none
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
6.2 Program management with PCU 20
Select the "Replace all" softkey to import all tool data. Any
existing tools will now be overwritten without a warning prompt.
-or-
Select the "Replace none" softkey if you want to cancel the data
import.
-or-
Select the "No" softkey if you want to keep the old tool.
If the old tool is not at the saved magazine location, it is relocated
there.
-or-
Select the "Yes" softkey if you want to overwrite the old tool.
With the tool management option without loading/unloading, the old
tool is deleted; the old tool is unloaded beforehand in the variant with
loading/unloading.
If you change the tool name before importing it with "Yes", the tool will
be added as an extra tool to the tool list.
Work offsets
Existing work offsets are always overwritten when new offsets are
imported.
Magazine loading
If magazine loading data are not imported at the same time, tools are
entered without location number in the tool list.
6
File Management
6-365