Siemens SINUMERIK 840D Operation/Programming Manual page 350

6
File Management
6.2 Program management with PCU 20
6-350
You can display the directories and programs on floppy disks and
network drives:
Please refer to the machine manufacturer's instructions.
In the overview, the symbols in the left-hand column have the
following meaning:
Directory
Program
Zero point/tool data
The directories and programs are always listed complete with the
following information:
•
Name
The name can be up to 24 characters long. For data transfer to
external systems, the name is truncated to 8 characters.
•
Type
Directory: WPD
Program: MPF
Zero point/tool data: INI
•
Size (in bytes)
•
Date/time (of creation or last change)
ShopMill stores the programs that are created internally for calculating
the stock removal processes in the "TEMP" directory.
Information about memory allocation in the NC is displayed above the
horizontal softkey bar.
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
6
10.04
 Siemens AG, 2004. All rights reserved