Program Views - Siemens SINUMERIK 840D Operation/Programming Manual

1
Introduction
1.3 User interface

1.3.3 Program views

Program manager
-or-
-or-
1-42
You can display a sequential control program in various views.
In the program manager, you manage all your programs. You can
also select a program here for machining the workpiece.
Program manager
Select the program manager with the "Program" softkey or "Program
Manager" key.
You can move around within a directory using the "Cursor up" and
"Cursor down" keys.
Use the "Cursor right" key to open a directory.
Use the "Cursor left" key to move up to the next-higher directory level.
Use the "Cursor right" or "Input" key to open the process plan for a
program.
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
1
10.04
 Siemens AG, 2004. All rights reserved