Siemens SINUMERIK 840D Operation/Programming Manual page 313

3
10.04
3.10.8 Miscellaneous functions
Machine
funct. >
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
You can e.g. position the spindle again between the individual
machining steps or activate the coolant or stop machining.
The following functions are available:
•
Spindle
Determine direction of spindle rotation or spindle position (see
Sec. "Starting, stopping, and positioning a spindle manually")
•
Gear stage
Set gear stage, if machine has gears
Please refer to the machine manufacturer's instructions.
•
Miscellaneous M functions
Machine functions, such as "Close door"; they are additionally
provided by the machine manufacturer
Please refer to the machine manufacturer's instructions.
•
Coolant
Activate/deactivate coolant 1/2
•
Tool-spec. fct 1 to 4
Select tool-specific functions 1 to 4; they are additionally provided
by the machine manufacturer
Please refer to the machine manufacturer's instructions.
•
Dwell time
Set time after which execution on the machine is continued
•
Programmed stop
Stop execution on the machine if the "Programmed Stop" softkey
is also active (see Sec. "Program control").
•
Stop
Stop execution on the machine
Press the "Line Circle" and "Machine func." softkeys.
Enter the desired parameters.
Press the "Accept" softkey.
Programming with ShopMill
3.10 Miscellaneous functions
3
3-313