6
10.04
Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
6.3 Program management with PCU 50
You can display the directories and programs of the following storage
media:
•
Network drives (network card necessary)
•
Floppy disk drive
•
The hard disk as archive directory.
Please refer to the machine manufacturer's instructions.
In the overview, the symbols in the left-hand column have the
following meaning:
Directory
Program
Zero point/tool data
The directories and programs are always listed complete with the
following information:
•
Name
The name can be up to 24 characters long. For data transfer to
external systems, the name is truncated to 8 characters.
•
Type
Directory: WPD
Program: MPF
Zero point/tool data: INI
•
Loaded
A cross in the "Loaded" column indicates whether the program is
still in NC main memory (X) or whether it has been read out to
hard disk ( ).
•
Size (in bytes)
•
Date/time (of creation or last change)
ShopMill stores the programs that are created internally for calculating
the stock removal processes in the "TEMP" directory.
Information about memory allocation on the hard disk and in the NC is
displayed above the horizontal softkey bar.
6
File Management
6-367