Siemens SINUMERIK 840D Operation/Programming Manual page 259

3
10.04
Programming example
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
Drilling 4 positions with an obstacle in-between.
The holes are first centered and then drilled. When you have
programmed the first two positions at X=15, you need to program the
obstacle. The remaining positions are then programmed at X=100.
Safety clearance (SC)
Z
X
Y
15
100
X
Workshop drawing
Extract from machining plan for "Obstacle" programming example
Programming with ShopMill
3.7 Drilling
Z=20
Z=0
Z=-20
3
3-259