Opening A Program - Siemens SINUMERIK 840D Operation/Programming Manual

6
File Management
6.3 Program management with PCU 50
Opening a directory
-or-
...
-or-
Returning to the next
highest directory level
-or-

6.3.1 Opening a program

-or-
6-368
Press the "Program" softkey or the "Program Manager" key.
The directory overview is displayed.
Select the storage medium using the softkey.
Place the cursor on the directory that you want to open.
Press the "Input" or "Cursor right" key.
All the programs in this directory are displayed.
Press the "Cursor left" key with the cursor in any line.
-or-
Place the cursor on the Return line.
-and-
Press the "Input" or "Cursor left" key.
The next highest directory level is displayed.
To view a program in more detail or modify it, you must display the
machining plan for the program.
Press the "Program" softkey.
The directory overview is displayed.
Place the cursor on the program that you want to open.
Press the "Input" or "Cursor right" key.
The selected program is opened in the "Program" operating area. The
machining plan of the program is displayed.
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
6
10.04
 Siemens AG, 2004. All rights reserved