6
File Management
6.1 Program management with ShopMill
6.1
Program management with ShopMill
6-348
All programs that you have created in ShopMill for machining
workpieces are stored in the main NC memory.
You can access these programs at any time via the Program Manager
for execution, editing, copying, or renaming. Programs that you no
longer require can be deleted to release their storage space.
ShopMill offers several options for exchanging programs and data
with other workstations:
•
Own hard disk (PCU 50 only)
•
RS-232 interface
•
Floppy disk drive
•
Network connection
The following Sections explain the alternate program management
functions as used with PCU 20 or PCU 50.
Find out which PCU your ShopMill system is running on and then read
either "Program management with PCU 20" or "Program management
with PCU 50".
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
6
10.04
Siemens AG, 2004. All rights reserved