Siemens SINUMERIK 840D Operation/Programming Manual page 211

3
10.04
Call help display with the
key
Parameters
T, F, V See Sec. "Programming the tool, offset value and spindle speed".
Machining type Roughing
TR Reference tool for residual material
Z0 Workpiece height (abs.)
Z1 Depth with reference to Z0 (abs. or inc.)
DXY Max. infeed, plane
Alternatively, you can specify the plane infeed as a %, as a ratio --> plane infeed
(mm) to milling cutter diameter (mm).
DZ Max. infeed, depth
UXY Finishing allowance, plane
UZ Finishing allowance, depth
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
Then program as follows:
1. Contour pocket 1
2. Remove stock
3. Contour pocket 2
4. Remove stock
5. Contour pocket 1
6. Remove residual material
7. Contour pocket 2
8. Remove residual material
The "Residual material" function is a software option.
Press the "Cont. mill." and "Pocket Res. Mat." softkeys.
Pocket
Res. Mat. >
Help display for residual material
Programming with ShopMill
3.5 Contour milling
Description
3
Unit
mm
mm
mm
%
mm
mm
mm
3-211