Chamfering A Contour Spigot - Siemens SINUMERIK 840D Operation/Programming Manual

3
Programming with ShopMill
3.5 Contour milling

3.5.15 Chamfering a contour spigot

Parameters
T, D, F, S, V See Sec. "Creating program blocks".
Machining Chamfer
type
Z0 Reference point in Z direction (abs.)
FS Chamfer width; abs
ZF Insertion depth tool tip; abs or inc
3-220
If you have planned edge breaking, mill a chamfer after that.
Description
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
3
10.04
Unit
mm
mm
mm
 Siemens AG, 2004. All rights reserved