3
Programming with ShopMill
3.3 Creating a sequential control program
Search
Search
>
Search
>
Continue
search
Renaming a contour
Rename
Numbering program
blocks
Renumber
Closing the program
editor
3-184
Press the "Search" softkey.
Enter a block number or text.
Select whether the search is to commence at the start of the
program or the current cursor position.
Press the "Search" softkey.
ShopMill searches the program. The cursor highlights the search hit.
Press the "Continue search" softkey if you want to continue the
search.
Place the cursor on a contour in the machining plan.
Press the "Rename" softkey.
Enter a new name for the contour.
Press the "OK" softkey.
The name of the contour is changed and displayed in the machining
plan.
Press the "Renumber" softkey.
The program blocks are renumbered in ascending order.
Press the "Back" softkey to close the program editor.
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
3
10.04
Siemens AG, 2004. All rights reserved