Zooming And Panning The Workpiece Graphics - Siemens SINUMERIK 840D Operation/Programming Manual

5
10.04
5.9

Zooming and panning the workpiece graphics

Zooming the view
Details Enlarge
Reduce
Enlarge
-or-
Reducing the view
Details Enlarge
Reduce
Reduce
-or-
Automatic display size
Details Enlarge
Reduce
Autom.
Size
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition

5.9 Zooming and panning the workpiece graphics

You can adjust the size of the displayed graphics to meet your
requirements.
Press the "Details" and "Enlarge Reduce" softkeys.
Press the "Enlarge" softkey
+
or press the "+" key.
The graphics viewport is enlarged.
Press the "Details" and "Enlarge Reduce" softkeys.
New softkeys appear on the vertical softkey bar.
Press the "Reduce" softkey
or press the "-" key.
The graphics viewport is reduced.
Press the "Details" and "Enlarge Reduce" softkeys.
Press the "Autom. Size" softkey.
The viewport is fitted to the window size.
Automatic resizing takes account of the greatest extent of the
workpiece in each axis.
5
Simulation
5-341