3
Programming with ShopMill
3.10 Miscellaneous functions
Transfor-
mation >
Offset
Mirroring
>
...
3-304
Note that with mirroring, the travel direction of the cutting tool
(conventional/climb) is also mirrored.
New mirroring
Mirroring on the X axis
Mirroring of the X axis
Press the "Misc." and "Transformation" softkeys.
Select the coordinate transformation using the softkey.
>
Select whether you want to program a new or an additive
coordinate transformation.
Enter the desired coordinates.
Additive mirroring
Y
X
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
3
10.04
Siemens AG, 2004. All rights reserved