Analog Inputs; Current Measurement; Figure 17: Connection Example Of Transducer With Current Output At Input Ai1 - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-217 Telecontrol Module Compact, 8 AI, Web, MODBUS485
5.2.3

Analog Inputs

Only connect SELV/PELV voltages!
Only SELV/PELV voltages shall be connected to the device terminals.
Analog inputs are single-ended!
The analog inputs are single-ended and the "Aix–" connections are connected
internally to the "GND" connections.
Connect shielding!
Shielded cables are required for analog inputs. The cable shield must be
connected to the grounded DIN rail (see section "Connections" > "Shielding").
5.2.3.1

Current Measurement

Figure 17: Connection example of transducer with current output at input AI1

Manual
Version 1.0.0
Connect Devices 43